How To Replace Windows With Vinyl Siding

Download Article

Are you working on a house with vinyl siding and want to remove an exterior window but don't know what to practise? Does it seem likewise complicated? Well, this is a simple list of instructions that will make it achievable! Follow it closely, and you should have no problem.

1
Take out dry out wall surrounding window on the within of the business firm. Dry wall surrounding the inside of the window may make it the way of the procedure. To do this:
- Utilise a utility pocketknife to "score" the perimeters of the drywall you desire to remove. "Scoring" is the using a knife to make shallow cuts without cutting it all the way to allow the dry out wall to be removed easier.
- Utilise a pry bar or a similar tool to pull off the drywall slowly and carefully, then every bit non to break drywall that yous don't want to remove.
2
Remove the window and screen. There is no exact way to do this, as long as you end up with the window and screen out while not destroying the frame or anything else around the window.^[1] Some suggestions:
- Apply a hammer or a drill to take out any nails or screws that are holding the window in place.
- Sometimes there are piffling pieces of wood between the window and the wooden studs that hold the window tight. Remove this by pounding out with a hammer or using a pry bar like tool to push them out or using a drill to unscrew them if screwed in.
Advertizing
3
Cut the perimeter of the window frame.
- This volition make information technology loose and easier to pull out.
4
Pull out the outside window frame. This is a uncomplicated step that can be started by using a hammer or drill to remove nails or screws that hold in the window frame.
- Use a pry bar or hammer to "wedge" out the frame.
five
Remove the exterior vinyl casing. This will be on the perimeter of the open infinite in the wall and volition almost likely be the same color and cloth as the actual siding itself.
- Apply hammer to remove nails used to go on information technology in place.
- Apply pry bar to pull it out carefully without scratching or breaking surrounding vinyl.
vi

Identify which pieces of vinyl siding need to be removed. You will be able to easily come across the separate vinyl pieces by noticing where one piece overlaps the other on the side.
7
Remove the pieces of vinyl siding from around the window expanse. Do non cut the vinyl off.
- Employ a siding removal tool. Extract nails keeping the vinyl pieces in place in order to prepare vinyl pieces to exist removed.
- Use this tool by inserting it where a piece of vinyl overlaps a slice below information technology and then sliding it across until you lot reach the end of the slice.
8

Mensurate the vertical length of the open up space using a tape measure. Write downwards this measurement, every bit information technology will exist used for the next pace.
9
Cut the "2 by 4s" into three pieces equal to the length of the measurement of the previous footstep. And so, place these pieces of wood in the centre and the two sides of the open space.
- If it is hard to place these in their spots, utilize a hammer to pound them in as desired.
ten
Smash in the pieces of woods. This depends on the size of the window, only generally, as mentioned in the previous stride, boom one to each side of the hole and one directly in the middle.
- Nail in horizontally for side pieces and diagonally for middle pieces. A nail gun may make nailing easier and quicker, especially for nailing diagonally.
11
Measure perimeters of the open up infinite. Cut a sheet of wood appropriately to the measurements so that it will fit.
- This will be a sheet of woods at least a half inch thick for strength.
12
Insert the exterior wall. Insert it on the exterior side of the pieces of wood.
- Nail or screw in securely to where the pieces of wood are behind the sheet of woods.
- Brand certain the sheet of woods is "flush" against the studs. "Flush" means with no space between the pieces of wood and the sheet of forest.
13
Cut the tip of a tube of caulk. Then, insert a long, skinny object in the tip and then remove it.
- This allows an opening for the caulk to come out of.
xiv
Identify tube of caulk into a caulk gun and squeeze caulk in the desired spaces described below.
- Caulk the perimeter of the new exterior wall. Caulk is used to seal spaces betwixt 2 objects. In this example, the objects are the perimeter of the new exterior wall and the perimeter of the quondam open space.
- This prevents whatsoever air leakage.
15
Smooth out the caulk. This guarantees that there are no open up spaces for air to get out of.
- An easy style to exercise this is using your finger.
16
Attach the wet barrier. A moisture bulwark can simply be a thin plastic sheet that covers the expanse of the new exterior wall.^[2] Information technology is needed because it prevents wet from getting inside.
- Cut the thin plastic canvas to appropriate dimensions so that it will cover the entirety of the new exterior wall.
- Using a staple gun, staple the moisture bulwark to the new outside wall.

1
Cutting the new pieces of vinyl. If you look at the area you are working on, you volition see spaces of dissimilar lengths where the vinyl needs to be replaced.
- Measure the lengths of the spaces with no vinyl.
- Cutting the new vinyl pieces accordingly. A vinyl cutter works best for this job.
2
"Nothing" the newly cutting vinyl pieces to the old vinyl pieces still on the side of the house. "Zipping" is the term used in siding when the superlative and lesser of 2 pieces are continued.
- This tin can only be done using the Siding Removal tool mentioned in Stride v.
- Once again, use this tool by inserting it where a slice of vinyl overlaps a slice below it and so sliding information technology beyond until yous attain the end of the slice.
- This tool removes two pieces that are already "zipped" and as well "zips" two pieces together.
3
Nail in all of the new pieces of vinyl. All of the vinyl pieces have little holes on the top of them where nails can be inserted.
- Use a hammer to insert nail in virtually every fifth hole, or whatever you may experience necessary.
- It is best to use roofing nails for this.
4
Inspect all of the new pieces of vinyl.
- If some pieces are not nailed or "zipped", they may become too loose and become damaged.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Always wear prophylactic goggles and piece of work gloves. This is non a high-take chances project, just things tin can happen. Work safe and have fun!

Advert