How To Install Wifi Adapter In Windows Xp

This article will guide you in setting up your wireless PCI adapter to your Windows XP reckoner. To do this, follow the steps below:

i. Connecting the Adapter
ii. Installing the Drivers

NOTE: Practise not run the Wireless PCI Adapter Setup Wizard. Remove whatever CDs from your computer'south CD/DVD-ROM drive.

Connecting the Adapter

Before connecting the wireless adapter to the PCI slot of the reckoner, brand sure that the computer is turned OFF to avert electric shock.

Step ane:
Open your computer's instance and locate an bachelor PCI slot on the motherboard.

Notation: For details, see your computer documentation or contact your estimator manufacturer.

Step 2:
Slide the adapter into the PCI slot. Brand certain that all of its pins are touching the slot'due south contacts. You may take to apply a scrap of pressure to slide the adapter all the way in.

NOTE: If the antenna is attached to the PCI adapter, unscrew information technology before plugging in the computer.

Step 3:
After the adapter is set firmly in place, secure its fastening tab to your reckoner's chassis with a mounting screw so close your figurer's example.

Stride iv:
Adhere the external antenna to the adapter'southward antenna port and make sure that the antenna is positioned straight upward into the air at a 90º angle from the adapter. This will ensure optimum wireless operating range and performance.

Step five:
Plough ON your computer.

NOTE: If you are using Windows 2000 or XP, yous may see a Windows Digital Signature warning. Click Yes to go on since the adapter has been tested and found to work with Windows.

Installing the Drivers

Step 1:
After Windows XP automatically detects the wireless adapter, insert the setup CD into the CD ROM drive.

NOTE: The setup CD that came with the product contains the drivers for your wireless adapter. You lot tin can likewise download the drivers from Linksys Home Support. To learn how to download drivers, click here.

Footstep two:
When the Found New Hardware Wizard window appears, click Install the software automatically (Recommended) then click Next.

NOTE: The Hardware Installation screen may announced indicating that the adapter has not passed Windows Logo testing. Ignore the window and click Continue Anyhow to continue with the installation since the adapter has been tested and constitute to piece of work with Windows XP.

Footstep 3:
When Windows has finished installing the driver, click Finish.

You're done installing the drivers. To connect to a wireless network using XP'due south Wireless Goose egg Configuration, click here.

Related Articles:

Checking if the Linksys Wireless Adapter is Properly Installed
Resolving an Inactive Wireless Network Adapter
Using the Wireless Network Monitor
Connecting to a wireless network using the Linksys Wireless Network Monitor
Connecting to a Wireless Network with SSID Broadcast Disabled using the Linksys Wireless Network Monitor
Encountering issues when installing or updating the wireless adapter drivers

Source: https://www.linksys.com/au/support-article?articleNum=133173

Posted by: chienwrourner.blogspot.com